PD engine fitting parts | Gearbox adapter for the Porsche 996/997 gearbox | TDI and flipped gearbox conversion parts | Volkswagen Type 2/Bay and T3/T25 Rear Disc Brake Kit | Volkswagen T3/T25 Braided Brake Hoses | Volkswagen T3/T25 Wheel Spacers | Wheel Fitting Studs, Nuts and Bolts | TDI Turbo adaptors | TDI Conversions | Sump adapter | T3 Diesel Bell Housing Adapter from 50 degrees to 20 degrees | 01E flipped gearbox adapter plates
PD Engine Fitting Parts
It is possible to mount the PD engine into the VW T3, T25, Vanagon at 50 degrees using a combination of parts from the original VW transporter 1.6TD and custom parts available from Ultimate Engineering.

Custom parts include:
Plug and play wiring loom £400
This is made from your VW Golf or other transverse engine wiring loom.Sump adapter kit £350
To mount the JX 1.6TD sump to the PD engine blockTurbo adapter kit £120
To mount the VNT turbo from a Passat or Audi A4/A6 VNT turbo onto the JX exhaust manifold. This combination also allows the use of the JX aluminium engine mount on the left side of the engine and the JX inlet pipe (from air filter to turbo) with rubber ends to be used as part of your conversion.Right hand engine mount £125
A custom engine mount will be required for the right hand side of the engine block.Coolant hose joiners (25mm, 32mm, 38mm, 51mm) From £6
Used with the JX hoses which need to cut to suit the PD engine block.Intercooler silicone hose kit £POA
This is required to pipe in the Passat, Audi A4, A6 intercooler when mounted to the intercooler scoop when using the 012 gearbox.Intercooler scoop £140
This galvanised metal scoop is used to mount the intercooler from the Passat, Audi A4, A6 to the side of the 012 flipped gearbox. It offers exceptional cooling due to its location in fast moving air.